TECH - Modified Inline

mi4ceo · mi4ceo

The **** is sitting crooked, so im going to pull the motor back out. luckily have a 4 day weekend next week. i just finish lining everything up so i can pull the motor, axles are out. just have to hook up the chain and undo the mounts. Yo anthony, kenta, dennis. yall need to bring your ass over here friday foo...

tito · tito

well my current engine has it's days numbered. However, i've got a LS block sitting at my crib back in chesapeake with a bent rod waiting for some lovin. so this was my current plan just to have a solid running car this summer and eventually go boost. -pic up some LS rods for cheap. -get new rings/get new ro...

Mi4Si · Mi4Si

yo homies, I need a camber kit because I'm tired of wearing out my tires so damn fast and I should've bought one when I got the setup back in 03. my question is does it matter which one I get? I'm running eibach sportlines and kyb agx struts, so do I need to get the eibach joint or will the progress kit do...

aznskaterboy · aznskaterboy

heres a video of that k series em2 i was talking about. what do you guys think?http://www.youtube.com/watch?v=_5CpeRhAupo edit: i found some more k20 vids. http://www.youtube.com/watch?v=8DX9FSvnlhY http://www.youtube.com/watch?v=kjvASKQMPNo -- Edited by aznskaterboy at 18:22,...

aznskaterboy · aznskaterboy

ok you probably seen that im boosting the sohc right now. but as i said when i come back from the desert ill have plenty of skrilla saved up to do my swap. now i wanted to go all out and do something like this guy on this civic forum im on. he swaped a k20a2, fully built, and its boosted at 24psi putting down 520w...

Autobahn Bred · Autobahn Bred

While i was on r&r last month i completed a long overdue project. New oem Sachs clutch kit, 210mm. included disc, pressure plate, thrust plate and thrust plate retaining spring, flywheel, 210mm, lightened and balanced. Weighs 9 pounds, flywheel bolts, pressure plate bolts, rear crank seal...

Icedemon · Icedemon

Anybody know if the VX came with them? Or is this a dumb question because every car comes with them? Reason I'm asking is because I was thinking about getting the ITR from ICBMotorsports. They have front and rears for about $100 brand new.

tito · tito

anybody ever replace their exhaust valve seals? Mine need to be done, but i've never done anything like that...any help/info would be appreciated.

mi4ceo · mi4ceo

http://tech.hybridgarage.com/tech/7gtech/7g-swap.htm

Big Higg · Big Higg

Did any one read the article about the new K23 motor, (in the new Acura RDX), that was in Sport Compact Car , last month. The basics: -it's a turbocharged 2.3L, boasting 240hp and 260 in Tq. at 4500 rpm. -Compression is down to 8.8:1 -It's said to be much stronger and b...

Icedemon · Icedemon

Is this brand or company along the lines of SSautochrome and OBX? I seen some of there stuff and the prices look damn good.

Rabid Machina · Rabid Machina

does craig still have his blown motor? im thinking about going with the type s k20 instead of type-r k20, just cuz its half as cheap and capable of the same gains with a little work. inputs please. -- Edited by Rabid Machina at 10:22, 2006-07-19

mi4ceo · mi4ceo

http://forums.clubrsx.com/showthread.php?t=343731&highlight=k20a3+cams183hp/143tq, Raz Cams Stg II - k20a3, stock bottom end, no head porting. might not have to splurge on a k20a or a2 now.

Mi4Si · Mi4Si

My KyB AGX front struts have seemed to given up, I've had to had both of them repaired at some point, my front end is rubbing like a mofo. The back end rides nice and looks good. So I'm looking for a set of struts that will work with the eibach sportline springs I have. I'm leaning toward...

mi4ceo · mi4ceo

http://forums.clubrsx.com/showthread.php?t=364862&highlight=k20a3+cams

mi4ceo · mi4ceo

http://www.k20a.org/forum/ if you working on K motors you can go here for all your questions.

mi4ceo · mi4ceo

welcome to the new temp board of modified inline 4. feel free to post about anything. Make sure you post in the correct forum.

Topic		Started By	Replies	Views	Last Post
	i have to pull the motor out (Preview) The **** is sitting crooked, so im going to pull the motor back out. luckily have a 4 day weekend next week. i just finish lining everything up so i can pull the motor, axles are out. just have to hook up the chain and undo the mounts. Yo anthony, kenta, dennis. yall need to bring your ass over here friday foo...	mi4ceo	7	1316	Sun Nov 12 8:29 AM, 2006 by mi4ceo
	My Engine (Preview) well my current engine has it's days numbered. However, i've got a LS block sitting at my crib back in chesapeake with a bent rod waiting for some lovin. so this was my current plan just to have a solid running car this summer and eventually go boost. -pic up some LS rods for cheap. -get new rings/get new ro...	tito	14	1062	Fri Oct 27 9:50 PM, 2006 by tito
	Camber.. (Preview) yo homies, I need a camber kit because I'm tired of wearing out my tires so damn fast and I should've bought one when I got the setup back in 03. my question is does it matter which one I get? I'm running eibach sportlines and kyb agx struts, so do I need to get the eibach joint or will the progress kit do...	Mi4Si	3	921	Sat Sep 30 8:13 AM, 2006 by Slimsta Jimsta
	kswap video (Preview) heres a video of that k series em2 i was talking about. what do you guys think?http://www.youtube.com/watch?v=_5CpeRhAupo edit: i found some more k20 vids. http://www.youtube.com/watch?v=8DX9FSvnlhY http://www.youtube.com/watch?v=kjvASKQMPNo -- Edited by aznskaterboy at 18:22,...	aznskaterboy	13	909	Fri Sep 29 2:49 PM, 2006 by Rabid Machina
	kswap (Preview) ok you probably seen that im boosting the sohc right now. but as i said when i come back from the desert ill have plenty of skrilla saved up to do my swap. now i wanted to go all out and do something like this guy on this civic forum im on. he swaped a k20a2, fully built, and its boosted at 24psi putting down 520w...	aznskaterboy	20	1116	Sat Aug 12 8:39 AM, 2006 by Rabid Machina
	Installed (Preview) While i was on r&r last month i completed a long overdue project. New oem Sachs clutch kit, 210mm. included disc, pressure plate, thrust plate and thrust plate retaining spring, flywheel, 210mm, lightened and balanced. Weighs 9 pounds, flywheel bolts, pressure plate bolts, rear crank seal...	Autobahn Bred	9	946	Mon Aug 7 8:16 AM, 2006 by Mi4Si
	Sway Bars (Preview) Anybody know if the VX came with them? Or is this a dumb question because every car comes with them? Reason I'm asking is because I was thinking about getting the ITR from ICBMotorsports. They have front and rears for about $100 brand new.	Icedemon	12	1022	Sat Aug 5 10:55 AM, 2006 by Rabid Machina
	valve seals (Preview) anybody ever replace their exhaust valve seals? Mine need to be done, but i've never done anything like that...any help/info would be appreciated.	tito	26	1062	Fri Aug 4 2:42 PM, 2006 by mi4ceo
	dennis...K swap into EM2 (Preview) http://tech.hybridgarage.com/tech/7gtech/7g-swap.htm	mi4ceo	1	966	Fri Aug 4 9:14 AM, 2006 by aznskaterboy
	K23A1 (Preview) Did any one read the article about the new K23 motor, (in the new Acura RDX), that was in Sport Compact Car , last month. The basics: -it's a turbocharged 2.3L, boasting 240hp and 260 in Tq. at 4500 rpm. -Compression is down to 8.8:1 -It's said to be much stronger and b...	Big Higg	3	1744	Wed Aug 2 8:34 PM, 2006 by mi4ceo
	Tsudo (Preview) Is this brand or company along the lines of SSautochrome and OBX? I seen some of there stuff and the prices look damn good.	Icedemon	9	830	Mon Jul 31 5:36 PM, 2006 by Icedemon
	K20? (Preview) does craig still have his blown motor? im thinking about going with the type s k20 instead of type-r k20, just cuz its half as cheap and capable of the same gains with a little work. inputs please. -- Edited by Rabid Machina at 10:22, 2006-07-19	Rabid Machina	15	1027	Mon Jul 24 11:30 PM, 2006 by Rabid Machina
	k20a3 (Preview) http://forums.clubrsx.com/showthread.php?t=343731&highlight=k20a3+cams183hp/143tq, Raz Cams Stg II - k20a3, stock bottom end, no head porting. might not have to splurge on a k20a or a2 now.	mi4ceo	3	873	Mon Jul 24 7:35 PM, 2006 by Icedemon
	New struts (Preview) My KyB AGX front struts have seemed to given up, I've had to had both of them repaired at some point, my front end is rubbing like a mofo. The back end rides nice and looks good. So I'm looking for a set of struts that will work with the eibach sportline springs I have. I'm leaning toward...	Mi4Si	4	815	Wed Jul 19 8:34 AM, 2006 by Mi4Si
	Type S cams in K20a3 head (Preview) http://forums.clubrsx.com/showthread.php?t=364862&highlight=k20a3+cams	mi4ceo	0	3005	Sat Jul 1 11:20 PM, 2006 by mi4ceo
	K series one-stop spot (Preview) http://www.k20a.org/forum/ if you working on K motors you can go here for all your questions.	mi4ceo	0	866	Sat Jul 1 11:09 PM, 2006 by mi4ceo
	welcome (Preview) welcome to the new temp board of modified inline 4. feel free to post about anything. Make sure you post in the correct forum.	mi4ceo	0	832	Sat Jul 1 9:41 PM, 2006 by mi4ceo
Page 1 of 1 sorted by